background image

Charging the QLinkTV

The QLinkTV has a built-in rechargeable battery and can be used for up to 7 hours 

when fully charged. Before using it for the first time, it is recommended to charge the 

battery fully. When the QLinkTV is low on power, the 

red

 LED will flash, indicating that 

it is time to charge the battery.

To charge, connect the USB cable to the QLinkTV and to the AC power adapter as shown 

on page 10, then plug the AC power adapter into a standard power outlet or surge 

protector (recommended). The 

red

 LED will be on during charging. It takes about 3 

hours to fully charge the battery. Once charging is complete, the 

red

 LED will turn 

blue

.

Alternately, you can safely leave the power supply plugged into the QLinkTV at all 

times, eliminating the need to re-charge its battery.

Note:

 Please do not attempt to take the battery out of the QLinkTV, as this may damage 

the QLinkTV and will void your warranty.

                         

Important:

                         1)  The QLinkTV battery is recyclable.
                         2)  Do not dispose of the battery in a fire, as this will result in an explosion.

12

Charging

Summary of Contents for QLinkTV































Reviews: