CONNECT NETWORK BRIDGES
4
Device ID Rotary
Selection Switch
SET THE DEVICE ID
Set each CONNECT CobraNet and CONNECT AVB unit to a unique ID
using the Device ID selector rotary switch on the back of the unit. (Range
0-7) Each CONNECT unit in any site needs a unique Device ID. Only 8
units are allowed in any site.
NOTE: Save the CONVERGE Console site file before performing
any firmware upgrade.
1. Download the 4.2.X firmware file to the stack of units.
2. The units will default and reboot after the download of 4.2.X
firmware.
3. Units are fully upgraded.
4. Verify units have been upgraded by checking the firmware version
on the front panel.
Reconnect all E-bus cables, if needed, to complete the stack of units.
