QUICK-START GUIDE
3
Quick Start Summary
These steps must be done in the following order to use the CONNECT
network audio bridge in your CONVERGE Pro Site:
1. Update the CONVERGE Pro firmware to version 4.2.X using
CONVERGE Console.
2. Set the Device ID of the CONNECT CobraNet and/or CONNECT
AVB using the Device ID rotary selector switch at the back of the
bridge.
3. Connect the CONNECT CobraNet and/or CONNECT AVB to the
updated CONVERGE Pro/SR via the Expansion bus (E-bus).
4. Update the CONNECT network bridge firmware
5. Configure the CONNECT CobraNet and CONNECT AVB with
CONVERGE Console.
UPDATE THE CONVERGE PRO FIRMWARE
Update your CONVERGE Console to version 4.2 or higher. CONNECT
CobraNet and CONNECT AVB network audio bridges are not recognized
by systems running older versions and the 4.2.X versions offer significant
upgrades from previous versions.
ClearOne strongly encourages users to upgrade all firmware to the latest
release version.
Instructions for updating from version 1.X 2.X and 3X are detailed later in
this document.
