CONNECT NETWORK BRIDGES
6
UPDATING CONNECT COBRANET/AVB FIRMWARE
NOTE: All CONNECT CobraNet/AVB Pro units in the site must be
running firmware level 4.X to be compatible with the CONVERGE
Pro/SR units in the site.
1. Connect the E-bus cable between the CONVERGE Pro units and
the CONNECT audio network bridge.
2. Connect the CONVERGE Pro units with CONVERGE Console.
3. Open the
Firmware Loader
screen.
4. Browse for the CONNECT firmware file:
cobranet.mdo
for the
CONNECT CobraNet, and
avb.mdo
for the CONNECT AVB.
5. Download the CONNECT audio network bridge firmware.
6. The CONNECT audio network bridge will default and reboot after
the download of the firmware. (The version of the firmware can be
verified later using the
Unit Properties
screen for the CONNECT
network bridge.)
7. Units are fully upgraded. (All units connected via the E-bus on the
site are simultaneously updated.)
8. Restore the saved site file to the system using CONVERGE
Console.
