Chapter 5:
COLLABORATE Room: Installation and Setup Guide 35
Basic Operation
IN THIS CHAPTER
This chapter describes the basic operations of the system and includes the following
sections:
Initiating Calls
Accepting a Call
INITIATING CALLS
Calls can be initiated in several ways:
From the Manual Dialer
From the Address book
From the Online Dialer
From the Speed Dial
M
ANUAL
D
IALER
To initiate calls using the manual dialer:
1.
Press the
Menu
button on the remote control. A list of actions available is displayed.
2.
Select
from the system menu
3.
Enter the address of the remote party:
LAN
– IP address, Alias, E.164 number or DNS address.
ISDN
– Phone Number.
4.
Select the type of call:
H.323
or
SIP
– To initiate a call through the connected local network (LAN).
ISDN
- To initiate a call through ISDN line(s). The ISDN system must be configured
beforehand via the ISDN Settings pages.
5.
Select the maximum bandwidth for the call. If you are not sure, use the default on the
screen.
6.
Press
Dial
to initiate the call.
