Getting Familiar with SmartAid Invisible
1.
Microphone:
Sound enters through the microphone. You should be careful to keep
this area clean
2.
Removal Handle:
Pull on this handle to remove the SmartAid Invisible from you ear.
3.
Ear Buds:
We have included a variety of sizes of earbuds. You should use an earbud
that fits your ear canal comfortably. We recommend that you start with the smallest
Ear Buds and only change to larger Ear Buds if the hearing aid is too loose or if you
are experiencing feedback (whistling).
4.
Volume Control:
Rotate the volume wheel to change the volume. When the volume
wheel is in it’s lowest position you will not receive any amplification.
5. Speaker: Sound exits through the speaker. This is where the Ear Buds get placed.
It’s important to keep the Ear Buds clean, and to keep this opening clean. We
recommend that you remove the Ear Buds daily to clean this opening with your little
brush or with a clean cloth.
6.
Battery Door & On / Off Control:
The battery gets placed inside the battery door.
When the door is closed, the hearing aid is ‘On’, however you will not receive
amplification until the volume control is turned loud enough. When the door is open,
the hearing aid is ‘Off’.
Color Options: Red for Right Hearing Aid and Blue for Left Hearing Aid
www.clearlyhearing.com
4
