13
Fit the Drip Seal. The Drip seal is supplied in a 1m
length, this will need to be cut to the desired lengths
for each side of the pivot . The opening side Drip seal
will also need to be notched to fit under the door
magnet profile. Make the Notch 13mm in length and
finishing down to the horizontal ledge of the drip seal
14. Fit the drip seals to the glass door
Notch under Door Magnet profile
Sealing the Door set
15. T
ake the Cleaning Towele e and wipe the
surfaces of the Powder coated profiles
where Silicone will be applied Allow to dry (1
-2 minutes)
16.
The Door can now be sealed in place using
silicone sealant. Ensure all surfaces are first
cleaned with dry clean cloth. Seal between
the tray upstand and the Door set along the
bo om outside edges. Seal ver cally be-
tween the Wall Receivers and Wall Liner
Note MASKING the area to be Sealed will give
you a superior finish
17.
Your Door set is now complete
IMPORTANT: DO NOT apply sealant to the inside
of the shower
