7
FieldSmart
®
Fiber Distribution Point (FDP)
SCD Indoor/Outdoor Wall Box
________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 019477 REV A - Jan 2018
Installing Universal Cassette Mount for FDP-XWB2
Locate U-Mount package (P/N 012728) - typically shipped
separately inside of wall box.
Remove contents from plastic bag and carefully cut the different
components from the main bracket. There is an instruction card
included with each U-Mount bracket (P/N 012700).
1.
2.
Assemble U-Mount Bracket per instruction card.
Once assembled, screw the U-Mount bracket and retaining clips into the wall box. Location for this is on the back of the
instruction card
(Figure 1)
.
You are now ready to install cassettes into wall box, using the thumb screws to fasten the cassettes to the clear
brackets
(Figure 2)
. See Cassette installation manual for additional details.
Typical cable/jumper routing is included on the back of the instruction card.
Install designation label (shipped separately inside of wall box) – to the door. Make sure label is positioned below the
raised UL listing – located on the door of the box
(Figure 3)
.
3.
4.
5.
6.
7.
Figure 1
Figure 3
Figure 2
