23
Clearview Blue Cassette
__________________________________________________________
Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 019389 Rev E - July 2018
Store your 3 feet of slack in the appropriate slack storage
chamber of the splice tray, under the slack management
tabs.
Note: Exits 1L, 3L and 2R will require a Right Rear
Redirect in the splice tray. Refer to the Right Rear
Redirect section on page 27 for special routing
instructions.
Refer to the ribbon splicing section of this manual, and
return to the next step once you are ready to store the
remaining slack inside the cassette.
After you have spliced in the cassette and are ready to store your ribbon in the storage tray, consult page 18 or page
20, depending upon entrance used, for storage instructions. Ribbon will store in much the same way as buffer tube,
and the images of buffer tube storage are easier to use for visibility reasons.
Once routed, push the strain relief boot into the boot retainer at the exit.
Exit 1L
Exit 3L
Exit 2R
Exit 2L
Exit 3R
Exit 1R
7.
8.
9.
10.
