User manual
Made in Germany
Page 15
9. Fine adjustment of the tonearm
9.1 Adjustment of the tangential alignment
Use the lift to lower the stylus at the left hand end of the Clearaudio linear gauge, moving the
gauge so that the diamond sits exactly on the reference line (see Pic. 16a).
Lift the cartridge up again and then position it at the right hand end of the gauge (Pic. 16b).
Never move the cartidge in the alignment gauge while it is lowered.
If the needle is not parallel to the reference line, correct the position of the armwand, fix it slightly
and check your result again.
Repeat this process until the needle tip is perfectly in all positions in the reference line the setting
template is seated.
Finally, hand-tighten the screws on the terminal block to fix your result.
Pic. 16: Adjustment of the tangential alignment
Pic. 16a
Pic. 16b
