User manual / Bedienungsanleitung
Made in Germany
Page / Seite 9
Pic. 7: Distance from pivot to stylus
222 mm
4. Adjustment of the distance between spindle and pivot point
For the exact setting of the tonearm pivot point, we recommend to use the Clearaudio alignment
gauge (Art. No. AC005/IEC, also available from www.analogshop.de).
Make sure that the distance between spindle and the pivot point of the tonearm is exactly 222mm.
You can adjust the distance by rotating the tonearm base.
Please tighten the tonearm base and check the measurement again.
5. Adjustment of the tonearm
The following settings require to mount the cartridge on the headshell.
Always follow the cartridge manufacturer’s instructions.
Leave the stylus protector on your cartridge to avoid any
damages!
Now you can connect the respective signal cable with the matching
color pins of the cartridge.
Please note the following colour coding:
Red:
right channel / R+
Green:
right channel / R-
White:
left channel / L+
Blue:
left channel / L-
Connect the pins of your cartridge to the jacks of the tonearm cable, taking care not to use too
much force.
If necessary, you can use suitable precision pliers or tweezers for assistance.
Pic. 8: Mounting the cartridge
