User manual / Bedienungsanleitung
Page / Seite 8
© clearaudio electronic GmbH, 2022-04
Pic. 5: Putting the tonearm through the armboard
Pic. 4: Mount tonearm base
Pic. 6: Securing the tonearm
3. Mounting the
Satisfy Kardan
tonearm
Take the clamping ring and place it on
the recess in the tonearm base.
Now you can attach the clamping ring
to the tonearm base with the 3 supplied
M4 x 10 screws.
Make sure that the side hole of the
clamping ring (see Pic. 5) remains
accessible.
Insert the tonearm cable first and then
the tonearm foot of the
Satisfy Kardan
tonearm into the hole of the clamping
ring (Pic. 5).
Now fix the tonearm with the screw and
the hex wrench (Pic. 6), do not over-
tighten, so that you can finally adjust it
later!
