User manual
Made in Germany
Page 15
5.3)
In order to adapt the standard speed to your own preferences, you can also adjust the basic speeds
manually.
To adjust the speed for example for 33 1/3rpm, hold down the button for 33 until it flashes.
The remaining buttons now function as + and - to gradually reduce or increase the speed.
The respective key assignment can be found in the table below.
Speed
-
+
33 1/3rpm
45rpm
78rpm
45rpm
33 1/3rpm
78rpm
78rpm
33 1/3rpm
45rpm
If you want to reset this setting, proceed as described in point 5.2.
6. Special instruction
6.1) Maintenance
• If the
Reference Jubilee
turntable is not used for some time, please disconnect the motor from
the mains supply.
• Every two years you can lubricate the bearing of the turntable platter with the oil provided.
In this case it is enough to put 1 or 2 drops of the oil into bearing.
• Please take special caution regarding any damage of the power cord. Any damage should be
repaired only by authorized personal. A damaged power cord must be exchanged immediately!
6.2) Transport
The
Reference Jubilee
turntable must only ever be shipped in its original packaging.
This is a condition of the Clearaudio warranty. If you repackage the turntable, please follow all
steps given for installation and setup, in reverse.
• If any transportation of the
Reference Jubilee
turntable should be necessary, please always
remove the turntable platter and the shaft holder. Otherwise serious damage can occur!
• To avoid any dust coming into the bearing, the bearing hole also needs to be covered.
6.3) Service
Servicing of all Clearaudio products should be done by authorized personnel only.
In case of any repair, the Clearaudio
Reference Jubilee
turntable should be send to your nearest
authorized Clearaudio distributor or dealer.
