User manual
8
© clearaudio electronic GmbH, 2018/05
2.6
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the
platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the
platter does not slip or fall on your turntable.
Pic. 8: Setting the platter onto the bearing
2.7
Please check with the bubble level gauge, if your
Ovation
turntable is in a level position.
You can adjust each of the turntable’s feet to get the turntable
level. Only if the turntable is in a level position will you get the
best results with your turntable.
Adjust the height be turning the threaded spike feet.
When the table is properly level, lock the feet in place with the
nut (see below).
Please note:
Through turning the feets clockwise you will raise the
turntable,by turning counter clockwise the turntable will lower.
Pic. 9: Adjustment of level
Pic. 9.1: Adjustment of the height
