User manual
6
© clearaudio electronic GmbH, 2018/05
2.1
Place the pre-mounted chassis on your hifi-rack or another suitable surface.
Pic. 3: Placing the
Ovation
on the Flat Pads
2.2
To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided
ground cable into the hole of the screw from the bearing at the bottom side of the turntable and
connect the other end with your amplifier.
Pic. 4: Grounding the bearing of the
Ovation
2.3
Please remove the protective seal from the bearing shaft and place two drops of the synthetic
bearing oil (Art. No. AC068 available through
www.analogshop.de)
, on the ceramic bearing shaft.
Slip the bearing top onto the bearing shaft of the turntable.
Pic. 5: Bearing oil
