4
5
GETTING STARTED
1.
Carefully unpack
™
Mineral Rich Alkaline
Water Filter Pitcher, removing all packaging materials.
2.
Hand-wash pitcher, lid and filter reservoir with a mild
detergent and water. Do not use abrasive cleaners.
Rinse well.
TIP
: For hard water spots, periodically hand-wash your pitcher,
lid, and reservoir. For best results, dilute a teaspoon of vinegar
in a cup of water. Soak a soft sponge in vinegar solution and
wipe clean.
Do Not Wash iN DishWasher.
3.
Remove the filter from the packaging.
4.
Soak filter upright
in cold tap water
for 2 minutes and
shake it to remove
air bubbles (
A)
.
Repeat this step
to insure no air is
trapped inside filter.
5
. Insert filter into
reservoir. Press the
filter to the bottom
of the housing to
ensure a tight seal
and is firmly in
place.
iMPortaNt: You Must use MuNiciPallY treateD
/Private Well, Potable Water (e.g. taP Water).
Ready For Mineral Rich Alkaline Water
1.
Hold the water
reservoir in the
upright position and
align water faucet
into the water
window in lid of
pitcher. Use thumb
to open window.
(B)
2.
Fill the reservoir
with cold tap
water to the MAX
line through the
water window pour
through lid.
(C)
DO NOT
OvERFIll.
Hot water should
not be used
with the
™
pitcher filter
(Max 85°F / 29° C).
