12
Unit will not turn on
Unit must be charged. Connect to Power source. Charge for a few hours before use.
Unit is not recording
Check if memory card is installed or full. Another situation might be that the
memory card does not match the unit. Install the memory card supplied
with the unit or a similar type.
Battery is not charging
Check power connection and status of charging light. Charge for a few hours.
Battery issue may exist if there is no light and operation
Battery is dead after a few hours
Motion detection may be set to ON and draining battery by detecting excessive
motion. Change setting of motion detection to OFF. Default Motion is OFF.
No Memory Card
Card may not be installed correctly. Reinstall. Card may be mismatched to the unit.
Troubleshooting
CDHD-X3000_IB_TP_ENG_V1_170302.indd 12
3/3/17 4:38 PM
