Chapter 3: Configuring the CHAt 170
15
3. Click
Device Setup
from the buttons on the left. the device Setup screen appears displaying the general types of
devices you can configure for use with the CHAt 170.
4. from the
Select 1st
column, select the type of device you are connecting to the CHAt 170.
5. In the
Select 2nd
column, select the manufacturer of your device. If you are selecting
PC and Laptop
, select
All
. If
you are connecting to a vC breakout box and your manufacturer is not listed, select
Other
.
6. Select the model of the device from the list in the
Select 3rd
column. If you selected
PC and Laptop,
select
All
. If
you selected
VC Breakout Box
and the specific model number is not listed, select Other.
7. Once all three selections have been made, the
Add to My Devices
and
Apply to CHAT
buttons at the bottom of
the screen will become active.
8. when you are satisfied with your selections in all three columns, click the
Apply to CHAT
button to apply these
settings to the CHAt 170. A message will appear indicating that the settings were successfully applied to your
CHAt 170.
9. Click the
Add to My Devices
button and an entry containing these settings will be created in the My devices
screen allowing you to instantly select and apply this configuration in the future. A message will appear indicating
that the device was successfully added.
10. Repeat steps 1 through 8 for any additional devices you will be using with your CHAt 170.
to ensure optimal sound quality, you need to customize the CHAt 170’s audio settings for every ap-
plication and device you will use. Refer to the tuning procedures provided in the
Optimizing Sound
Quality
section that follows.