12
Mercury Quick Start Guide
Mercury Host – Initial setup
During the initial phase, a keyboard, mouse and monitor are
required but may be removed later. The Host and your PC will
normally be connected to an IP network. For initial setup, this
may be as simple as a single Ethernet cable connected between
the Host and your PC. However, do not connect the Host to your
LAN at this stage.
Please follow the instructions below step-by-step for initial setup.
1.
Connect a keyboard, mouse and monitor to the Host.
2.
Connect power to the Host: if your MIU has two power
supplies, one mains input is enough for now. The Host
will boot automatically.
3.
When prompted, log-in to Windows with the built-in
account, username
trilogy
password
trilogy
.
4.
The TBC screen will be displayed, as shown below. You
can show it again by double clicking the icon in the
System Tray.
Summary of Contents for trilogy Mercury
Page 1: ...Mercury Quick Start Guide...
