Vitec Group Communications
PRC-2 UHF Multi-Frequency Belt-Pack IFB Receiver
i i i
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
11. Unplug this apparatus during lightning storms or when unused for
long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
13.
WARNING:
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
SAFETY NOTES
Excessive sound levels can cause permanent hearing damage.
1. Always adjust the volume to the lowest level before listening to
unknown transmissions.
2. Use the lowest reasonable level consistent with hearing safety.
3. Do not use high sound levels in the earphone to overcome high
ambient sound levels. That is absolutely foolish! Demand and use
high isolation earphones.
4. Do not expose your ears to sound levels that cause them to ring. If
your ears do ring after exposure, think of it as a warning bell telling
you not to do that again.
Please read and follow these
instructions before operating
this product.
