Clear-Com ICS-24, Instruction Manual

Page: 15 / 30

I C S - 2 4 H E A D S E T S T A T I O N
3 - 1
INSTALLATION
1. Connect the 14- to 18-VAC power to the two-position terminal strip. Plug the
terminal strip onto the P2 as shown in Figure 2 on page 1-6.
2. Connect the eight-wire, modular RJ-45 connector to J1 as shown in Figure 2
on page 1-6.
3. If the RJ-45 Matrix connector should need to be unplugged, use the following
procedure:
1. Remove power from the station.
2. Using long-nosed pliers, grasp the top and bottom of the plug so that the
retaining clip will be depressed. Pull the plug out with the pliers.
• The ICS-24 runs on 14-
to 18-VAC power.
• Removing the RJ-45
Matrix connector requires
two steps.
3