Cleantecs LR-180-GTR Operating Instructions Manual Download Page 16

16

BA 0304972 R00 2021-08

 Intended use  

The LR-180-GTR is designed for 
cleaning sunblinds on external Venetian 
blinds.

 Improper and prohibited use  

The LR-180-GTR must not be tampered 
with.

 Requirements of the system user 

The user of the LR-180-GTR works in 
the commercial sector.

Operator: The user has received suffi-
cient and appropriate instruction about 
the tasks assigned to him and possi-
ble dangers in the event of improper 
behaviour. Tasks that go beyond the 
scope of the product’s normal operation 
may only be carried out by the operator 
if this is specified in these instructions 
and the operator has expressly entrust-
ed the user with this.

Specialist staff: Due to their profession-
al training, expertise and experience, as 
well as their knowledge of the relevant 
standards and regulations, the special-
ist staff are able to carry out the work 
assigned to them and to independently 
recognise possible dangers and avoid 
hazards. 

The following groups of people are not 
allowed to operate the LR-180-GTR:

 People with limited physical, sensory  

  or mental capacities 

 Children and young people under  

  18 years of age

 Persons who have not been trained

 Space requirements 

 Space requirements for storage: 

  W 300 mm x L 320 mm x H 260 mm

 The following working area is  

  required: Horizontal 2,000 mm,  
  vertical 1,000 mm 

 Power specifications for the re-
quired high-pressure cleaner 

 Pressure 

    120 bar

 Flow rate      10 l/min

 Temperature    Cold water

 Performance data in normal op-
eration   

The following performance data applies 
for the LR-180-GTR:

 Working pressure between 100 and  

  120 bar, approx. 1,300 revolutions  
  per minute.

 Noise level in normal operation  

  71 decibels.

 Performance limits for operation     

 The LR-180-GTR may be operated at  

  a maximum of 140 bar.

 The LR-180-GTR requires a volume  

  flow of 10 litres per minute.

 The water temperature must not  

  rise above 40 °C at its peak.

 Water quality for operation 

 The LR-180-GTR is operated with  

  partially desalinated water. 

Fundamentals

Summary of Contents for LR-180-GTR

















































Reviews: