Cleantecs LR-180-GTR, Operating Instructions Manual

Page: 13 / 48

13
BA 0304972 R00 2021-08
Components and their function
Basic unit: The base consists of the
basic unit, to which the round brushes
are attached according to the size of
the sunblinds.
Brush axis: The brush axis is the guide
of the round brush. A detent sleeve is
mounted on the tip of the brush axle.
The round brush engages in this via a
spring-loaded ball.
Drive housing:
The turbine and the
gearbox are located in the drive hous-
ing. Here, the stored energy in the water
is converted into mechanical energy.
Handle:
The LR-180-GTR is held and
guided during work by a handle that
can be easily removed to dismantle the
drive housings for cleaning and repair
work.
Threaded rod:
The threaded rod is
used to change the distance between
the drive housings simultaneously. This
allows the LR-180-GTR, together with
the matching round brush, to be adjust-
ed to the sunblind that is to be cleaned.
Basic unit
Brush axis
Threaded rod Handle
Drive housing
Fundamentals