5
UNIT ASSEMBLY
Please ensure that the main power switch is in the off position and the
battery pack is not connected before starting the assembly procedure.
As per the diagram, push the handle, floor brush and dust container into the
corresponding connection points on the main body. Then connect the hose to
the rear of the floor brush, making sure that the connection is secure when the
unit is placed in the upright position. The accessories can be stored on board
which is on the left of the main unit. When you want to take off the handle set
and floor brush set, you just need to press the relevant locking block and pull
them out. When you want to empty the dust container, you just need to press
the release button and pull it out.
BATTERY PACK ASSEMBLY
As per the diagram, insert the battery pack into the
front of the main unit and lock it into place. Then press
the power switch to turn the machine on (the red light
will illuminate to indicate the power is on). To turn off
the machine, press the power switch again (the red
light will stop to indicate that the power is off). When
you want to take out the battery pack, simple press the
lock block and pull it out.
