6
PREPARING THE VACUUM CLEANER
1. Fit the hose on the vacuum cleaner by inserting the rotating hose
connection into the vacuum cleaner until you hear a click. To
remove the hose, press the button at the side of the hose
connection and pull it out.
2. Assembling the telescope tube and accessories
2.1. Fit the telescopic tube into the other end of the hose.
2.2. Adjust the length of the telescopic tube by pushing the locking
mechanism down and pulling in the bottom section of the tube to a
suitable length. When parking, shorten the tube as far as possible.
2.3. Fit the floor brush into the telescope tube.
Floor Tool
The floor tool has two settings. When cleaning hard
surfaces (parquet flooring, flooring tiles, etc.), the brushes
should be extended. When cleaning carpets and mats, the
brushes should be retracted into the floor tool. Press the
brush change button to switch between the two settings.
Joint Nozzle
For radiators, corners, skirtings, etc.
