Troubleshooting
Trouble
Possible Cause
Remedy
Suction weakens or cleaner
runs hot
Clogged filter
Brush dirt from filter. If condition
continues, change filter.
Air leak
Check all fittings for tight fit
(nozzle, hose, etc). Check the
head of the vacuum is sealed
properly.
Obstruction in hose or nozzle
Check nozzle, hose, etc for
obstruction, and remove if present.
Vacuum does not run
No electricity
Make sure electrical outlet has
voltage. (a qualified electrician
may need to be contacted).
Misting in the exhaust air
Saturated filter
Dry or replace saturated filter with
a dry filter.
Mounting ring falling off
Foam filter incorrectly positioned
Position foam filter on the outside
of groove around cage on head.
WARNING: REDUCE THE RISK OF INJURY FROM MOVING PARTS AND / OR ELCTRICAL SHOCK,
TURN POWER SWITCH OFF AND DISCONNECT PLUG FROM ELECTRICAL OUTLET BEFORE
PERFORMING TROUBLESHOOTING CHECKS.
WARNING: IF ANY MOTOR HOUSING PARTS SHOULD BECOME DETACHED OR BROKEN,
EXPOSING THE MOTOR OR ANY OTHER ELECTRICAL COMPONENTS, OPERATION SHOULD BE
DISCONTINUED IMMEDIATLEY. THIS WILL HELP AVOID INJURY OR FURTHER DAMAGE TO THE
VACUUM. REPAIRS MUST BE MADE TO THE VACUUM BEFORE BEING USED AGAIN.
8
Summary of Contents for LIL' RIPPER
Page 9: ...Exploded View 9...