EN
22
5. Insert the foam
fi
lter into the
fi
lter holder.
6. Reinsert the
fi
lter holder and
fi
rmly press it down.
7. Insert the dust container into the device (see “Inserting the Dust Container into the
Device”).
Cleaning the HEPA Exhaust Air Filter
The HEPA exhaust air
fi
lter is located behind the exhaust air hatch on the back of the
vacuum cleaner.
1. Press both release buttons (
D
) of the exhaust air hatch.
The exhaust air hatch drops out.
2. Remove the HEPA exhaust air
fi
lter by pressing the lock-
ing catch (
E
) towards the
fi
lter and pulling it out at the
same time.
3. Tap out the HEPA exhaust air
fi
lter. Brush off with a soft
brush if necessary.
IMPORTANT:
Do
not
clean the HEPA exhaust air
fi
lter
with water!
4. Brush or wipe out the
fi
lter compartment if necessary.
5. Insert the HEPA exhaust air
fi
lter into the
fi
lter compartment and press it down
fi
rmly.
6. Insert the exhaust air hatch into the
fi
lter compartment. When you do this, make sure
that the locking lugs on the bottom of the exhaust air hatch sit correctly in the recess-
es in the
fi
lter compartment. You must hear and feel the exhaust air hatch engage.
Cleaning the Housing and Nozzles
• Clean the housing with a slightly damp, soft cloth if necessary.
• Regularly remove hair and
fl
uff from the nozzles.
Storage
• For storage purposes, hook the
fl
oor nozzle into the holder on the back of the device
(see illustration) and collapse the telescopic tube as far as possible.
• Store the vacuum cleaner in a cool, dry indoor room out of the reach of children and
animals.
D
E
