background image

3

Grounding Instructions

State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects 
or other reproductive harm.

This appliance must be grounded. If it should malfunction or break down, grounding provides a 
path of least resistance for electric current to reduce the risk of electric shock. This appliance is 
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must 
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all 
local codes and ordinances.

This appliance is for use on a nominal 120 volt circuit 
and has a grounding attachment plug that looks 
like the plug illustrated in Fig. 1. Make sure that the 
appliance is connected to an outlet having the same 
configuration as the plug. No adapter should be used 
with this appliance.

Warning - Improper connection of the equipment-
grounding conductor can result in a risk of electric 
shock. Check with a qualified electrician or service 
person if you are in doubt as to whether the outlet is 
properly grounded. Do not modify the plug provided 
with the appliance. If it will not fit the outlet, have a 
proper outlet installed by a qualified electrician.

Fig. 1

Summary of Contents for CMP-3N

















Reviews: