7
Your vacuum cleaner is equipped with on-board cleaning
tools, including a telescopic wand, stretch hose, dusting brush
and a crevice tool.
1. To use the cleaning tools, lift the hose handle straight up
from the vacuum (Fig. 1).
2. Extend the wand by pulling the button back and pulling
the smaller wand out of the larger wand (Fig. 2).
3. Attach any of the on-board tools to the end of the
wand, or if you do not need the wand, any tool can be
connected directly onto the hose handle.
Cleaning with On-Board Tools
Fig. 1
Fig. 2
Your vacuum cleaner is equipped with a secondary filter and a HEPA media filter.
These filters capture fine dust particles and protect the motor from dirt. Accumulated
dirt in the bag compartment will be collected on the filters and may restrict motor
performance. It is important to change the filters regularly — approximately once a year
or as needed.
How to Change the Secondary Filter
1. Unplug the vacuum cleaner. Remove the bag compartment cover and remove
the vacuum bag.
2. Remove the secondary filter by sliding it out from under the bag supporter (Fig. 1).
3. Insert a new filter, replace the bag and bag compartment cover.
How to Change the HEPA Media Filter
1. Unplug the vacuum cleaner. Remove the filter cover below the dust compartment
cover (Fig. 2).
2. Remove the filter from the front of the vacuum (Fig. 3).
3. Insert a new filter and replace the filter cover.
Fig. 1
Fig. 2
Fig. 3
How to Change the Filters
