Always operate the vacuum cleaner with a vacuum bag installed.
Bags should be changed when they are 2/3 full.
How to Change the Vacuum Bag
1. Unplug the vacuum cleaner. Remove the bag compartment
cover (Fig. 1).
2. Remove the bag from the bag holder by grasping the sides of
the bag collar and pulling straight off. Attach a new vacuum bag
by pushing the collar onto the inlet (Fig. 2).
3. Pull out the bottom corners of the new vacuum bag to expand
the bag capacity (Fig. 3).
4. Reinsert the tab on the end of the bag compartment cover into
the groove on the bag compartment housing. Press the bag
compartment cover into place, closing it tightly.
6
5
Fig. 2
Fig. 1
How to Change the Vacuum Bag
Fig. 3
The height adjust dial should be on the
LOW setting at all times for optional
cleaning performance on commercial
carpet (Fig. 1).
Nozzle Height Feature
Fig. 1
The edge cleaning feature provides improved cleaning near walls and stationary furniture. For maximum edge
cleaning, position the right side of the vacuum from the user’s perspective near walls or stationary furniture.
Edge Cleaning Feature
How to Attach the Extension Power Cord
Use LOW Setting
for Commercial Carpet
How to Attach the Extension Power Cord to the Cord Lock
1. Connect the extension power cord to the pigtail cord on the vacuum.
2. Snap the extension power cord into the slot on the end of the cord
lock.
3. Turn the knob on the bottom of the cord lock to tighten the lock and
prevent the cords from pulling apart (Fig. 1).
How to Attach the Cord to the Retainer Hook on the Handle
1. Create a loop in the power cord and push it through the slot and over
the hook of the cord retainer (Fig. 2).
2. Pull down on the power cord to remove any slack (Fig. 3).
Fig. 1
Fig. 2
Fig. 3
