Clayton 690-73004 Series, Operation And Maintenance

Page: 4 / 4

ILLUSTRATED PARTS BREAKDOWN
MAINTENANCE INSTRUCTIONS 3
5
TROUBLE SHOOTING 4
Repair or Warranty Contact Clayton Associates, Inc.
•
1650 Oak Street
•
Lakewood, New Jersey 08701
•
P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•
Sales@JClayton.com
Important:
A Preventative Maintenance Program is recommended whenever portable power tools are used.
Routine Maintenance:
• Use only genuine Clayton replacement parts to ensure quality
• Clean the tool with a damp cloth. Do not use petroleum based cleaners
• Visually inspect shafts, bearings, pad holders, and abrasives for frays, visible damage and signs of deterioration. Replace damaged
or worn components before use
Handling and Storage:
• Use of tool rests, hangers and/or balancers is recommended
• Protect abrasive from exposure to water, solvents, high humidity, freezing temperature and extreme temperature changes
• Store Dust Collection Shrouds in protective racks or compartments to prevent damage
Warranty & Repair:
This tool is covered by a 1 year manufacturer’s warranty. Wear items such as bearings and pad holders are not covered.
Excessive Vibration Is Felt During Tool Use
• Shroud may be damaged or bent – stop using tool immediately, identify cause and correct
Excessive Dust Is Evident During Operation
• Clayton Dust Collection Shrouds reduce airborne (respirable) dust. You may see some larger debris not being collected that may require
vacuuming at the end of grinding operations. This is normal.
• Vacuum may be turned off, or vacuum filters may be clogged – check vacuum to ensure that it is operating properly, and that filters
are clean
• Hose or shroud may be blocked – disconnect all hose fittings, and ensure that the pathway from shroud to vacuum port is clear
# ITEM NO DESC
1 673-M16C16 1IN X 1IN SWIVEL
2 673-M16F FEMALE SWIVEL
3 674-3004-01 DRILL SHROUD FRAME
4 674-3004-02 DRILL SHROUD TRACK
5 674-3004-03 DRILL SHROUD TUBE
6 674-3004-04 DEPTH STOP FRONT
7 674-3004-05 DEPTH STOP REAR
8 674-3004-07 DRILL SHROUD CLAMP
# ITEM NO DESC
9 674-3004-08 CHUCK ADAPTER
10 674-3004-12 THREADED CLAMP
11 674-3004-13 DOWEL NUT
12 674-3004-14 SPACER
13 674-3004-15 SPRING – SHORT
14 674-3004-23 SPRING – LONG
15 674-3004-C1875 TIP ASSEMBLY 1.1875
16 674-3004-C7000 TIP ASSEMBLY 1.7000
# ITEM NO DESC
17 921-1000PBKSC 1IN VACUUM HOSE
18 929-RR-0.1875EX SNAP RING 3/16IN EX
19 929-RR-1.125IN SNAP RING 1-1/8 INT
20 929-RR.50EX SNAP RING 1/2IN EX
21 931-0818ZZ-26K BEARING
22 941-KN0424 THUMB SCREW CAP
23 941-TS0832-06P THUMB SCREW RED
24 SE025603-ACSM-A SCREW 2-56 X 3/16