background image

14

ALPHA WASH 1500 LT

To enable the "Advanced Menu" set up the "Access code" (1234) using
the UP 

B

, DOWN 

C

RIGHT 

E

keys.

Press

F

- "Menu advanced" appears on the display

UP LOAD FIRMWARE
Allows you to transfer the firmware from 1 fixture to all the connected fixtures.
1)  Press

F

, a confirmation message appears on the display.

2)  Select YES to start the firmware loading or NO to keep the current set-

ting and return to the top menu level.

SETUP MODEL
Allows you to change the default model of projector.
1)  Press

F

a confirmation message appears on the display.

2)  Select YES to define the model of projector or NO to keep the current

setting and return to the top menu level.

CALIBRATION
Allows you to adjust effects from the control panel to obtain perfect unifor-
mity between the projectors.
1) Press

F

-  “channels” appears on the display. 

2) Using the UP 

B

and DOWN 

C

keys, select the effect you wish to

regulate.

3) Press 

F

and use the RIGHT 

E

, UP 

B

and DOWN 

C

buttons to

make the adjustment by setting a value between 0 and 255.

4) Press 

F

to  confirm  the  selection  or  LEFT 

D

to  keep  current  set-

tings and return to the top level.

FACTORY DEFAULT
Allows you to restore default values of all channels (128).
1)  Press

F

–  a  confirmation  message  appears  on  the  display  (Reset

calibration to factory default ?).

2) Select  YES  to  reset  calibration  to  factory  default  or  NO  to  keep  the

current setting and return to the top menu level.

ADVANCED MENU

Advanced

Code

1234

Calibration

Pan                              128
Tilt                               128
Cyan                            128
Magenta                      128
Yellow                          128
CTO                             128
Dimmer                        128
Strobe                          128
FrostMove                   128
FrostIns                       128
Color                            128
Beam Shap.move         128
Beam Shap.Ins.           128
Beam Shap.Rot.          128
Factory default              128

Upload

Firmware

Transfer the firmware on all
the connected fixtures ?
Are you sure ?
Yes/No

Setup

Model

Changing to a wrong model
may damage the fixture.
Are you sure ?
Yes/No

Summary of Contents for ALPHA WASH 1500 LT





























Reviews: