Clay Paky ALPHA BEAM 1500, Instruction Manual

Page: 9 / 28

9
ALPHA BEAM 1500
Swap Pan-Tilt
Used for swapping Pan and Tilt channels (as well as Pan fine and Tilt fine).
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
Pan and Tilt channel swap.
3) Press to confirm the selection or LEFT tto keep current settings.
Encoder Pan-Tilt
Used for enabling the Pan / Tilt encoders.
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
Pan / Tilt encoders.
3) Press to confirm the selection or LEFT to keep current settings.
COLOR
Color mixing
Used for reversing the CMY color mixing system.
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys select one of the following settings:
RGB color mixing mode
CMY color mixing mode
3) Press to confirm the selection or LEFT to keep current settings.
Fixed wheel short-cut
Used for optimizing color change time so that the disc turns in the direc-
tion that requires shorter movement.
1) Press
– the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
color change optimization.
3) Press to confirm the selection, or LEFT to keep current settings.
SHUTTER
Shutter on error
Used for automatically closing the stop/strobe in the event of Pan/Tilt
position error.
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
automatic stop/strobe closing in the event of Pan/Tilt position error.
3) Press to confirm the selection, or LEFT to keep current
settings.
Dimmer on Shutter
Enables automatic closing of the dimmer when the strobe is completely closed.
1) Press
– the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
the automatic closing of the dimmer.
3) Press to confirm the selection or LEFT to keep current
settings.
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
- the current settings appear on the display (On or Off).
2) Use the UP and DOWN keys to enable (On) or disable (Off)
the decreasing of display brightness.
3) Press to confirm the selection or LEFT to keep current
settings.
Color
Swap
Pan-Tilt
On
Off
Encoder
Pan-Tilt
On
Off
Color
Mixing
Rgb
Cmy
Fixwheel
Shortcut
On
Off
Shutter
Shutter
On Error
On
Off
Dimmer On
Shutter
On
Off
On
Off
Display
Continue
➔