4.
A new fan module can now be pushed into the empty space by placing fingers on each of
the same left and right brackets. It will click into place when it is level with the other 2
modules. Be sure to push in the module slowly and squarely without forcing it into the
empty slot.
5.
If power to the appliance is on, the fan will begin to spin immediately.
6.
Replace the metal grill by locating its two tabs into the locating holes on the left and secure
it by screwing back the retaining screw by hand. The retaining screw requires just moderate
hand tightening and extra tightening with a tool is not required.
Tip: Having spare fan modules onsite
Having spare fan modules onsite and available will mean no delay if replacements are
required. These can be ordered from your local sales representative.
Chapter 4: Product Maintenance
71