DNS servers are set automatically after connection with PPPoE.
•
4D. PPTP settings
The username and password supplied by your ISP for PPTP connection should be entered. If
DHCP is to be used with the ISP then this should be selected, otherwise
Static
should be
selected followed by entering the static IP address supplied by the ISP.
DNS servers are set automatically after connection with PPTP.
Wizard step 5: DHCP server settings
If the Clavister Security Gateway is to function as a DHCP server, it can be enabled here in the
wizard on a particular interface or configured later.
The range of IP addresses that can be handed out must be specified in the form
n.n.n.n - n.n.n.n
,
where
n
is a number between 0 and 255 and
n.n.n.n
is a valid IP address within a subnet local to
the security gateway.
For example, the private IP address range
192.168.1.50 - 192.168.1.150
might be specified.
Chapter 3: CorePlus Configuration
33