32 |
Nord Wave User Manual v1.1
Equalizer (
eq
)
the 2-band equalizer with a
shelving characteristic that
can be used for boosting or
cutting frequencies in the
sound.
range: from -15dB to +15db
treBle
knob
applies a cut or boost on
the treble frequencies of the
sound, above 4 khz.
BASS
knob
applies a cut or boost in the bass frequencies of the sound,
below 100 hz.
The red LEDs will be lit when the knob’s position is set
•
to anything other than 0.
choruS
Chorus is an effect that
simulates what happens if
you have more than one
instrument playing the same
notes. this effect can make
the sound “broader” or
warmer.
The Chorus effect is very subtle in mono operation.
•
choruS
button
Press repeatedly on the Chorus button to activate the ef-
fect and to select one of the 3 intensity settings.
range: off (no LEd is lit, 1, 2, and 3 (both LEds are lit)
The
•
choruS
and
eq
effects are individual to both
the Slots in a Program.
Program Effects
the Program Effects are 3 effect units that are common to
both the Slots in a Program.
Delay
the delay can add an echo effect to
the sound. the delay can operate in
mono or in stereo, with the delayed
sound appearing in an alternating
pattern in the left and right audio
channel.
temPo
LED
the
temPo
LEd indicates the time
between the repeats in the delay
effect.
temPo
knob
the
temPo
knob sets the time inter-
val between the repeats.
range: 2.26 s to 64 ms
feedBAck
button
the
feedBAck
button allows you to select the amount of
repeats. there are 4 settings to chose from, ranging from
one repeat (no active LEds), to several (1 & 2 LEd are lit).
Press the feedback button repeatedly to select the desired
feedback level.
Stereo
button
the
Stereo
button (
Shift
+
feedBAck
button) activates
the delay in stereo operation. the repeats will appear in
the left and then the right audio channel, in an alternating
pattern.
AmouNt
knob
the
AmouNt
knob controls the amount of the delay effect
in the audio signal.
range: 0.0 to 10.0
tAP temPo
button
the
tAP temPo
button allows you to set a tempo setting
of the delay effect by tapping it. By repeatedly tapping this
button, the tempo is set to match the interval as you hit
the button. the more times you tap, the more accurate will
this interpretation be, but two taps may also be sufficient.
oN/off
button
turns the delay effect on or off.