Clavia Nord Stage Revision C User Manual Download | Manualshive

Page: 21 / 101

background image

Nord Stage v3.1x

5. The Program section: What is a Program?

Page 19

W

HAT

IS

A

P

ROGRAM

?

A Program basically stores everything (except System functions which are mostly global). To under-
stand the internal architecture in Nord Stage, keep the following in mind:
• For each

Panel

, settings for all three Instruments, the four Panel Effects, and the Extern section are

independent (except the choice of organ model, which is always shared between the panels).

• A

Program

stores settings for both Panel A and B, so a Program contains independent settings for

six instruments, eight Panel Effects, and two Extern sections.

• A Program also stores all settings from the Extern menu, except the Extern A & B MIDI channels

and the Send on Load setting (see

“Extern menu” on page 70

), and the output routings for each

instrument (see

“System menu” on page 66

• The Global effects (Compressor/Reverb) and the Rotor effect affect both Panels, and are stored

with the Program as well.

• Splits, layers (Keyboard Zones) and Morph assignments are of course also part of a Program.

A

BOUT

THE

L

IVE

1&2 B

UFFERS

The special Live memory feature can be described as a “live program memory”. If you activate the

L

IVE

1

OR

2

buttons, all changes to panel settings you make will be continuously saved. If you switch

the power off, or select another Program, the settings are still stored in the Live memory, so when you
power up next time (or return to the Live memory) all settings will be exactly as you left them.
Having two Live memory locations means that two independent setups can be “saved” in this way.
If Live memory is selected and you decide you wish to store the settings permanently as a Program
you can do so using the standard methods (see below).
You can also store Programs into the Live 1 or 2 memory locations, in which case the Program set-
tings will replace the current Live memory settings. Note that when you store a Program into either
of the Live memory locations, the stored settings will be “transferred” to Live memory, i.e. any
changes you make will be stored continuously, and you will not be able to revert back to the exact
settings as they were when “stored”.
The Live buffers are useful, e.g., for improvisatory performances, and as scratch pads for new sound
setups.

«
...
19
20
21
22
23
...
»

Summary of Contents for Nord Stage Revision C






































































































Reviews:

No comments

Related manuals for Nord Stage Revision C

Brand: Roland Pages: 244

Brand: Casio Pages: 23

Brand: CreamWare Pages: 12

Brand: Cwejman Pages: 52

Brand: Yamaha Pages: 20

Brand: Yamaha Pages: 39

Brand: Yamaha Pages: 51

Brand: Yamaha Pages: 64

Brand: Yamaha Pages: 84

Brand: Sequential Pages: 119

Brand: Roland Pages: 128

Brand: E-Mu Pages: 10

Brand: Expert Sleepers Pages: 5

Brand: Alesis Pages: 20

Electrocomp 500

Brand: EML Pages: 38

Brand: Moog Pages: 23

Brand: NF Pages: 204

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands