3. UsiNG THe Nord PiaNo 3 | 11
lisT/orGaNiZe
To display a list view of the sample synth samples, or to change the order in which they are
stored, use the
LIST/ORGANIZE
functions:
1
Press
SHIFT
while turning the
SAMPLE SELECT
dial to enter
LIST
mode and display a list view
of the samples. Turn the dial to navigate through the list.
2
Hold down
VALUE
to enter
ORGANIZE
mode and enable moving the selected sample to a
different location. Two arrows indicate that turning the dial will move the sample up or down
the list.
3
release the
VALUE
button to drop the selected sample at the desired location. Navigate to
a different sample in the list and repeat from step 2. Press
EXIT
to leave the
LIST/ORGANIZE
view.
Vers.nr
v2.3
Korr. nr
1
Datum, rev.
2016-04-10
Datum, urspr.
2015-09-07
Konstruktör
José Esparza
Layout / ändrad av
Tina Jeppsson
Godkänd av
Benämning
SVEP
NORD PIANO 3 HA88
Clavia part #
40616
Mått plåt (mm)
1245,50 x 168,71
Skala
1:1
NCS-S-6000-N
540 001 (NCSS 9000-N)
542 002 (NCSS White)
-
1
2
3
4
■
Grå
■
Svart
■
Vit
-
Färgnummer (NCS-nr)
Lagerordning
Färg
LAGER 1: NCS-S-6000-N Grå
LAGER 2: 540 001 Svart (NCS-S-9000-N)
LAGER 3: 542 002 Vit (NCSS White)
eFFeCTs 1
effects 1 offers
Tremolo, Pan, Wah
and
Ring Modulator
effects. The
RATE
knob sets
the rate of each effect, or in case of the
Wah the frequency of the peak resonant
filter.
TREM
(Tremolo) is an effect which modu-
lates the volume of the sound at a variable
rate. The effect has three selectable depths
ranging from moderate to more dramatic
volume modulation. The rate range is
0-10
.
The
PAN
effect provides a cyclic panning
modulation that smoothly moves the sig-
nal between the left and right sides of the
stereo image. There are three different Pan
settings, ranging from small to full amounts
of panning. The rate can be varied be-
tween 0-10,5 Hz.
The
WAH
effect consists of a resonant low-
pass filter, which can be swept across the
frequency range, using the rate control.
The effect is sensitive to the volume of the
sound, which means that the velocity with
which you play determines the amount of
“Quack” achieved. The rate range is
0-10
.
at slow rates, the
RM
- ring Modulator - effect has a Tremolo-like quali-
ty. Higher rates will give an increasingly inharmonic, metallic sound. The
pitch, or rate of the effect is controlled with the rate control, and ranges
from
0-10
.
The
CTRL PED
function lets you control any of these effects using a
Control Pedal. For the Tremolo and Pan effects, the pedal will alter the
effect
amount
, whereas the ring Modulator will have its
rate
altered
when using the pedal. The Wah effect - just like a real Wah Wah pedal -
has its filter frequency altered by the position of the pedal.
eFFeCTs 2
effects 2 provides a selection of modulation
effects, including two types of
Phaser,
a
Flanger
, two
Chorus
types and a
Vibe
ef-
fect. each effect has its rate altered by the
RATE
control.
The
PHASER
effect produces a characteris-
tic sweeping, or “phasing” sound. There are
two Phaser types to chose from and the
rate range is
0-10,5 Hz
.
The
FLANGER
effect will give any sound
source a “swooshy” and resonant quality.
its rate range is
0-10,5 Hz
.
The versatile
CHORUS
effect gives the
impression of slighthly widening, or with
more extreme settings severely detuning
the sound. There are two Chorus types, the
second being more bold in character. The
rate can be varied between
0-2,7 Hz
.
The classic
VIBE
effect produces a sound
with both pitch-bending and phasing qual-
ities. The rate of this effect has a range of
0-10,5 Hz
.
The effects 2 section has an additional
DEEP
mode, which will give each effect a more pronounced character.
Vers.nr
v2.3
Korr. nr
1
Datum, rev.
2016-04-10
Datum, urspr.
2015-09-07
Konstruktör
José Esparza
Layout / ändrad av
Tina Jeppsson
Godkänd av
Benämning
SVEP
NORD PIANO 3 HA88
Clavia part #
40616
Mått plåt (mm)
1245,50 x 168,71
Skala
1:1
NCS-S-6000-N
540 001 (NCSS 9000-N)
542 002 (NCSS White)
-
1
2
3
4
■
Grå
■
Svart
■
Vit
-
Färgnummer (NCS-nr)
Lagerordning
Färg
LAGER 1: NCS-S-6000-N Grå
LAGER 2: 540 001 Svart (NCS-S-9000-N)
LAGER 3: 542 002 Vit (NCSS White)
eFFeCTs
The effects section consists of four different effect units capable of processing either the Piano or the sample synth section, an equalizer which can
be used to process either or both sections and a global reverb effect. all units apart from the reverb have a
SOURCE
control which can be set to
PIANO
,
SYNTH
or none. When no source is selected the effect unit is bypassed.
M
In general the effects are applied in the order in which they appear on the panel, but there are some exceptions. For example, the Pan effect of
the Effect 1 section is placed after the Spkr/Comp effects in order for it to retain its usability.
