4
2.3 Installation
It is the sole responsibility of the installer to ensure
that the points of attachment to the building are
sound. Consultation with the consultant/architect or
owner of the building is recommended to ensure that
a sound, mechanically stable installation is achieved.
Before fitting or wiring the heater, ensure that the
casing faces as shown on the picture, and follow
these installation guidance notes.
The wall bracket is secured to one of the inner
cardboard box corners. Cut the plastic bag to remove
it. All fixing screws, switch and parts for the swivel
bracket are packed under the terminal cover.
Carefully unpack the unit and remove the terminal
cover.
The heater must always be installed horizontally
,
using the mounting bracket provided. This ensures
correct positioning and adequate clearance.
Assemble the swivel bracket as shown on Fig.3. Use
M8 and M5 bolts with locknuts and washers as
supplied in a bag. Attach the assembled bracket to
the bottom of the heater by using 4 x M6 bolts with
plain and spring washers as shown on Fig.3.
Secure the wall bracket to the wall with suitable fix-
ings. Ensure the position of this bracket will allow
suitable clearances between the heater, when fitted,
and adjacent walls. Minimum of
3 fixings
must be
used
to secure the wall bracket to the wall. Attach the
heater to the wall bracket.
Finally, adjust the direction of the heater to the
desired area and tighten up all clamping nuts and
bolts.
Fig. 3: Swivel Bracket Assembly
2. Installation & Connection Details
3. Intelligent Fan Control
The intelligent fan control incorporates one of the latest low energy consumption EC motors. This allows
the heater to operate quietly, whilst still providing the best possible levels of comfort.
The intelligent fan control is only activated when the heat is switched on. If the heater is running in fan/
boost mode only (heat switched off), then the fan will operate at a fixed speed.
When activated, the intelligent fan control detects the temperature of the room. Depending on which heat
mode is activated, it will calculate the best possible airflow temperature and will adjust the fan speed
accordingly.
NOTE: When turning the heater on, or changing heat mode or fan speed mode, the fan will
respond accordingly after a small time delay.
51000214 Iss 01
