Clatronic AE 3531, Instruction Manual

Page: 33 / 62

33
Cleaning
WARNING:
• Before cleaning always disconnect from mains power supply.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or ire.
• The centrifuge sieve is very sharp!
Danger of injury!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not leave the pulp to dry on the centrifugal sieve. The
ine pores will clog and become useless.
Tip
• Remove residues in the cen
-
trifugal sieve immediately under
running water. Use a dishwash
-
ing brush.
• For cleaning the outside of
the machine use only a damp
washing-up cloth.
Plunger, transparent Cover, Centrifuge Sieve, Centrifuge
Housing, Juice/Pulp Container, juice container
CAUTION:
The attachments are not suitable for dishwasher. Heat and
aggressive cleaning agents may warp or discolour the attach
-
ments.
• Clean these components in a rinsing bath.
• Clean the centrifugal sieve with a dishwashing brush. See
Figure.
• Rinse with clean water.
• Only assemble the device when all parts have been dried.
Storage
• Clean the device as described. Let the accessories dry
completely.
• We recommend that you store the device in its original
packaging when it is not to be used for a longer period.
• Always store the device at a well ventilated and dry place
outside the reach of children.
Troubleshooting
Malfunction Possible cause Remedy
The device does not
function.
The device is not supplied with power. Check the outlet with a different device.
Insert the power plug correctly.
Check your domestic fuse.
The safety interlocks are not closed. Check if all components were properly attached.
The device is defective. Contact our Service or a specialist.
The juice quantity is
small
Wrong fruit type. Select a fruit type producing more juice.
Juice cannot be extracted from small berries in the centrifuge.
Too much residue in the centrifuge sieve. Clean the centrifuge sieve.
Loud noise and
imbalance during
operation.
Bad assembly. Check that all components have been installed correctly.
Too much residue in the centrifuge sieve. When processing larger quantities clean the centrifugal sieve in-
between.