13
3) Feed the exhaust ducting to your desired position then adjust the height of the
inside chimney to the inner chimney bracket and screw in place. Once the
position is fixed secure the unit with two safety screws through the Ø6mm holes
in the back casing.
Fitting the chimney
9)
Take the two chimney sections
(C)
and
(D)
.
o
Rest the bottom of chimney section
(C)
on the
top of the hood. You should take care to position
the tabs on the chimney section into the rear of
the hood.
o
Mark the side measurement of both sides of
chimney section
(C)
on the wall with a pencil.
Summary of Contents for CLRH60LSS
Page 23: ......