12
LAYER VOICE
With layer mode, you can layer (or mix) two instrument sounds together.
Press the LAYER button and its indicator lights up to engage the dual voice mode. The
display shows the layered voice number (the default layered voice is strings). If press the
LAYER button and a voice select button simultaneously, the layer voice mode is engaged
as well but the LAYER indicator flashes. Then, use the voice select button, the
VARIATION button or
▲
,
▼
button to select the layer voice.
Press any button except
▲▼
and voice select buttons, or after finish the selection or not
manipulate for 3 second, the display shows the master voice and return to the voice select
mode. The LAYER indicator keeps on.
Press the LAYER Button again to exit the layer voice mode and the indicator turns off.
The volume balance between layered voice and master voice can be adjusted. Please
refer to FUNCTION chapter for details.
TRANSPOSE
The Transpose feature can shift the pitch of the piano up or down in semitone intervals.
Press the TRANSPOSE button to engage the transpose feature and its indicator blinks.
The display shows current transpose value (the default is 0) with the prefix “t” in front. Use
the
▲
,
▼
button to set the transpose value ranged -6 to 6, e.g. t-5. Press any button
except
▲▼
, or after finish the setting or not manipulate for 3 second, the display shows
master voice and return to the voice select mode.
When the transpose value is not zero, its indicator will keep lighting. Press the
TRANSPOSE button again to disable the transpose feature.
PI ANO
E. PI ANO
HARPSI CHORD
ORGAN
VARI ATI ON
VOI CE
STRI NGS
LAYER
TRANSPOSE
TRANSPOSE
