5
2. Attach the enclosure to the top of
the windshield.
Find the side release buckle at the top left side
of the enclosure and attach it around the driver’s
side front roof post just below the roof. Walk the
enclosure around your car and attach the right
top side to the roof post on the passenger side.
Don't worry if the enclosure sags at this point.
3. Attach the enclosure front to the
hook strips on the front roof posts.
At the front of your enclosure there is a fabric
triangle with three long strips of black loop
material on it. Depending on what type of golf car
you have one of these strips mates to the hook
material you applied to the car front roof posts
(See illustration on this page for details). Find
the correct strip and fold the leading edge of the
enclosure to the inside. The web loops now face
forward. Secure the loop strips on the enclosure
to the hook strips on the roof posts.
Note that you may need to adjust the top strap
slightly for the hook and loop strips to line up.
4. Apply the
windshield strap.
Locate the plastic bag containing the velcro and
straps and remove the single strap shown below.
This strap lies across the hood below the
windshield and holds the two front ends of the
enclosure together.
The C-shaped ends on this
strap attach to web loops
facing forward at the bottom
of the long black loop on the
enclosure front. (See above
for the correct loop to fit your
brand of golf car).
Fit the C-shaped end of the
strap to into the web loop
and the C-shaped end of the
Front fold-back
placement for
Club Car
Yamaha
EZ Go
Windshield strap
placement for
Club Car
Yamaha
EZ Go
Fit the C-shaped
plastic on the
ends of the strap
into the web
loops on the
enclosure front.
