Page 8
6.0 Cleaning
6.0 Cleaning
6.1 Prior to cleaning :
Switch off and isolate electrical supply before cleaning the appliance
WARNING
DO NOT
use cleaning agents that contain CHLORINE, BLEACH or HYPOCHLORITE.
DO NOT
use STEEL WOOL, WIRE BRUSHES or any other abrasive materials.
DO NOT
jet wash or hose pipe the appliance down either internally or on the exterior
6.2 Internal cleaning :
Remove wash / rinse arms and filters from within the appliance, now remove
the individual wash and rinse jets from each arm and wash in warm soapy
water, ensuring all debris are removed then rinse in clean water before
reassembling and fitting back into the appliance.
WARNING
Before cleaning the wash chamber, ensure all sharp items, such as broken glass or
other items which could cause injury are removed carefully
Now wipe the inside of the wash chamber ensuring any debris are removed
and the chamber is clean, now reassemble all filters and wash arms.
6.3 Exterior cleaning :
Wipe the exterior of the appliance with a damp sponge (NOT WET)
Once dry, clean using a STAINLESS STEEL cleaning agent
