background image

The Undersigned Manufacturer: 

Schiller Grounds Care, Inc. 

1401 Logan Street  

   

  

 

Norfolk, NE 68701

EU Authorized Representative

Authorized to compile Technical File: 

Earlsmere Limited 

Unit 18 Valley Road 

Station Road Industrial Estate 

Wombwell, Barnsley, South Yorkshire, S73 OBS UK 

Declare that the machine described below:

Make & Type…………………………………… Classen Self Propelled Turf Rake and Seeder

Category…………………………………………Turf Rake / Turf Seeder

Series…………………………………………….TRC-20

Engine……………………………………………Honda

Speed…………………………………………….High idle governor setting 3600 rpm ±100rpm

Net installed power……………………………..3.6KW (4.8 HP) and 5.3KW (7.0 HP)

Complies with the provisions of the following European directives and Amendments and the Regulations 
transposing it into national law.

Machinery Directive………………………………….. 2006/42/EC

ISO 12100: 2010 (Supersedes ISO 12100-1-2003+A1:2009)

EMC Directive………………………………………….2004/108/EC

Noise in the Environment Directive………………….2000/14/EC

Vibration Directive……………………………………..2002/44/EC

Non Road Emissions………………………………….2002/88/EC

Sound: 

Sound levels were determined in accordance with Directives 2000/14/EC (Annex V) and standard ISO 3744: 2009.

Vibration:
Hand/arm vibration was measured at the right and left operator hand holds per ISO 5349-1-2001 and
ISO 5349-2-2001. 

Intended Use and Limits:
This machine is for seeding grass to areas covered by grass or other vegetation cut to a short height.  The machine 

may also be used as a power rake or dethatcher.  It is intended for use on areas ranging from flat to 12 degrees.  

Loss of control may result on steeper slopes.  It is not intended for use in rocky areas.

EC Declaration of Conformity

Chuck Clark
Director of Operations
Date: March 8, 2011

Jim White
Managing Director
Date: March 8th, 2011

P/N C800025 Rev B

Series

TRC-20H-E

Guaranteed Sound Power Level

105 dBA

Sound Pressure

87  dBA

Vibration

11.1 m/s²

Summary of Contents for TR-20BE























Reviews: