background image

18

SPECIFICATIONS

SELF-PROPELLED WALK-BEHIND SOD CUTTER

SCHV-12/5.5 - S.N. 000101 & UP; SCHV-12/8.0 - S.N. 000101 & UP

SCHV-16/5.5 - S.N. 000101 & UP; SCHV-16/8.0 - S.N. 000101 & UP 

SCHV-18/5.5 - S.N. 000101 & UP; SCHV-18/8.0 - S.N. 000101 & UP

SCHV-20/5.5 - S.N. 000101 & UP; SCHV-20/8.0 - S.N. 000101 & UP

SCHV-24/8.0 - S.N. 000101 & UP

ENGINE

Model ................................................ 4 cycle 5.5 H. P. Honda
 

Model GX160 GX1600HV

 

9.9 cu. in. (163 cc)

Starter .......................................................................... Recoil

Governor.............................. 3600 RPM ± 100 RPM, no load

Clutch ................................. spring loaded belt tightener type

REDUCTION

Engine to blade......................................................... 3.03 to1

Engine to drive wheels ............................................ 57.2 to 1

WHEELS:

Drive ........................................... 8” (203 mm) Dia. w/knobby
 

tread vulcanized to hub

Rear ................ 8 x 1.75 (203 X 45mm) semi-pneumatic tires 

CUTTING WIDTH:

SCHV-12..................................................................... 11-3/4”

SCHV-16........................................................................... 16”

SCHV-18........................................................................... 18”

SCHV-20........................................................................... 20”

SCHV-24........................................................................... 24”

GEAR CASE

Lubrication .................................................EP 140 Gear lube

Capacity.........................................................31/2Pints(1.7L)

Hydro Gear Oil

 ..........................................................20W50

Cutting depth

 .....................................................up to 2-1/2”

BLADE PITCH

Hand lever adjustment..................................variable 0° to 9°

Blade speed

 ...................... 1188 RPM @ 3600 engine RPM

DIMENSIONS

Width ...................................23” - For all, except SC-24 - 25”

Length............................................................................... 59”

Height ............................................................................... 35”

Wheel Base ...................................................................... 22”

WEIGHT

Dry Weights

SCHV-12/5.5............................................................ 321* Ibs.

SCHV-12/8 .............................................................. 345* Ibs.

SCHV-16/5.5............................................................ 327* Ibs.

SCHV-16/8............................................................... 351* Ibs.

SCHV-18/5.5............................................................ 331* Ibs.

SCHV-18/8............................................................... 355* Ibs.

SCHV-20/5.5............................................................ 332* Ibs,

SCHV-20/8............................................................... 355* Ibs.

SCHV-24/8............................................................... 358* Ibs.

* Add 12 Ibs. to each above weight for CE Guards    

Summary of Contents for SCHV-12/5.5





















Reviews: