Classe Audio CP-800, Owner'S Manual

Page: 18 / 54

18
5 Navigation & Menu Buttons
The remote control contains the navigation buttons and the menu access
buttons. This array of buttons is used for navigating the menu system
on the CP-800 as well as providing basic transport controls to USB- and
Network-connected sources. Each of the buttons performs the following
function(s):
•
Menu
accesses the main screen for the menu system, in the same
fashion as the front panel Menu button.
• Home returns the touchscreen display to the Home page. The
Home
button essentially acts like a “back to start” button – no
matter how deeply you’ve navigated into the menu system, a
single button push returns you to the front page.
•
Navigation Arrows
are located in the familiar
Up
( p ),
Down
(
q
), Left (
t
), and Right (
u
) arrow positions which allow you
to select the different menu options within the menu system.
When on the home page, these buttons instead serve as transport
controls for USB sources with the typical play/pause, stop, scan/
skip forward and scan/skip backward commands.
• Pressing the
Enter
button selects the underlined menu item in
any menu screen.
• Tone accesses the Tone Control screen. Pressing Tone while on
the Tone Control screen activates the tone control. Subsequent
presses toggle between active and not active. While on the Tone
Control screen, the volume up/down keys increase or decrease
the tone control. See Tone Control Setup in the Menu System
section for more information.
• Bal is used to access the Left/Right balance. Use the Volume
arrows to adjust the L/R balance.
6 Function Keys (F1 to F8)
The last eight buttons on the remote control are the Function buttons, or
Fkeys, which provide additional flexibility to the CP-800 remote control.
Think of them as “favorite” buttons that provide direct access to specific
functions or commands not covered by the other buttons. Refer to the
Remote Fkeys description in the Menu System section found later in the
manual for more information.
Note: You may also remotely control the CP-800 by connecting it to a Network
and using the Classé App, available free of charge in the Apple App store. The
Classé App allows enhanced functionality compared with the IR remote, and
control can be exercised without line-of-site contact with the unit.