background image

 

 

 
 

-8-

CLASSÉ 175-A LIMITED FACTORY WARRANTY

 (North America only). 

 
 

 

Classé Audio Inc. warrants this amplifier to be free from defects in materials and 

workmanship for a period of

 FOUR YEARS

 from the date of manufacture, provided that any claim in 

virtue of this warranty be made in writing within such period.  

 

Subject to all of the conditions stated herein,

 A LIMITED FACTORY LIFETIME WARRANTY IS EXTENDED ONLY 

TO THE ORIGINAL OWNER WHO PURCHASED THE AMPLIFIER IN NORTH AMERICA AND WHO CLAIMS UNDER THIS WARRANTY IN 
NORTH AMERICA. 
 

IMPORTANT: WARRANTY REGISTRATION, AND A COPY OF THE "AUTHORIZED DEALER BILL OF SALE", MUST BE RECEIVED 

AT THE CLASSÉ FACTORY (address below) WITHIN TWENTY (20) DAYS OF PURCHASE, TO VALIDATE THIS WARRANTY. 

 

In the event of failure of this amplifier, resulting from defects in materials and workmanship, 

Classé Audio Inc. will repair, recalibrate, or at its discretion, replace the unit providing that all the 

conditions contained in this warranty are met. 

 

In order to initiate service of any kind, it is necessary to

 OBTAIN PRIOR FACTORY AUTHORIZATION, AND 

SHIP THE UNIT PREPAID TO THE CLASSÉ FACTORY.

  For units coming from outside Canada, contact the factory 

for our forwarding address. Units shipped directly to our Canadian address from outside the country 

will be stopped at the border, causing extensive delays or return of the unit to the sender. 

 

The warranty shall be void and of no effect in the event of any of the following: 

 

 

1)  Operation not in accordance with this manual; 

 

 

2)  Accident, abuse, tampering, or unauthorized 

 

 

    modification, as determined by Classé Audio Inc.; 

 

 

3)  Removal, defacing, or falsifying the serial number plate; 

 

 

4)  Shipping without the complete factory packaging; 

 

 

5)  Transfer or sale of this amplifier by the original owner; 

 

 

6)  Non-compliance with any of the other conditions hereof. 

 
 

CLASSÉ AUDIO INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, 

OR CONSEQUENTIAL DAMAGES ARISING FROM OR RELATING TO THE SET-UP, 

OPERATION, FAILURE, TROUBLESHOOTING, OR REPAIR OF THE AMPLIFIER 

AND/OR ANY OTHER EQUIPMENT USED THEREWITH. 

 

THIS WARRANTY, ALL CLAIMS MADE IN VIRTUE HEREOF, AND ALL ISSUES 

RELATING TO ANY SUCH CLAIM SHALL BE GOVERNED BY THE LAWS OF THE 

PROVINCE OF QUÉBEC. 

Summary of Contents for 175-A











Reviews: