background image

 

 

 
 

-10-

WARRANTY REGISTRATION

 

 
 

 

You must fill out and return the form below, along with a copy of the authorized dealer bill 

of sale, to the factory within twenty (20) days of purchase. This will allow us to provide expedient 

service, information regarding updates and new products, and validate the Classé warranty. 

 

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

 

 

175-A

 SERIAL NUMBER_____________________PURCHASE DATE_____________________ 

AUTHORIZED DEALER________________________________________________________ 

PURCHASER'S NAME_________________________________________________________ 

STREET ADDRESS____________________________________________________________ 

CITY________________________________STATE/PROV.____________________________ 

COUNTRY________________________ZIP/POSTAL CODE__________________________ 

I BECAME AWARE OF THIS PRODUCT BY:_____________________________________ 

 (DEALER, MAGAZINE, FRIEND, ETC.) 

 

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

 

 

 

              SEND TO: CLASSÉ AUDIO INC. 

 

 

                    Product Registration 

 

 

                    5070 François Cusson 

 

 

                    Lachine, Quebec, Canada 

 

 

                    H8T 1B3 

Summary of Contents for 175-A











Reviews: