CLAS PE 6002, Manual

Page: 36 / 60

PE 6001
DOUBLE SCISSOR LIFT 3T
PE 6002
SCISSOR LIFT 3T DUAL CYLINDERS LOW RAISE
The operator, installer, and maintenance personnel are required to comply with the applicable
safety regulations in the country where the lift is installed.
In addition, the operator, installer and maintainer must:
WARNING:
Indicates operations that are not safe and can cause minor injuries to persons,
damage to the lift, vehicles or other property.
CAUTION:
Indicates a possible danger that can cause serious injury to persons and property
damage.
RISK OF ELECTRIC SHOCK: A specific safety warning on the lift in areas where the risk of
electric shock is particularly high.
RISK AND PROTECTION DEVICES
We will now consider the risks to which operators and maintenance personnel can be
exposed when the vehicle is in position on the lift, together with the various safety and
protection devices adopted by the manufacturer to minimize these dangers.
For a better personal safety and vehicle safety, observe the following rules:
All of the following security messages are shown in this manual:
- Always work at the stations specified and illustrated in this manual;
- Never remove or disable mechanical, hydraulic, electrical, or other types of safety devices;
- Read the safety notes on the machine and the safety information contained in this manual.
Do not enter the danger zone when the vehicles are lifted. (Picture5)
Make sure the vehicles are positioned correctly. (Picture 6)
Make sure to lift only permitted vehicles, never exceed the specified load capacity,
maximum height and projection (vehicle length and width);
Make sure that there is no person on the platform during the lift up and down movements
and while the vehicle is in the highest position.
-
-
-
-
-
GENERAL PRECAUTIONS
Picture 6
36